Intelligent new technology to advance productivity

Reducing scan time improves the patient experience and increases throughput. With intelligent new technology that advances our Rapid Scan technology, Vantage Galan 3T delivers on a productivity promise that goes beyond expectations.

Compressed SPEEDER*

Compressed SPEEDER is a new imaging technique that can accelerate scan times across the whole body. This unique imaging approach enables high-speed imaging up to four times current scan speeds while maintaining excellent image performance.

* Compressed SPEEDER is covered by the following U.S. Patent number: 7,646,924.

0.6 x 0.6 mm resolution, 3 mm slice

CS x2 3:05

CS x3 2:01

CS x4 1:36

0.4 x 0.4 mm resolution, 2.5 mm slice

CS x2 3:05

CS x3 1:56

CS x4 1:29

Accelerated Diffusion Weighted Imaging with MultiBand SPEEDER

MultiBand SPEEDER acquires multiple slices simultaneously, which enables reduced scan times. DWI scans in particular can be acquired in about half the time compared to previous sequences.

Faster Scans with Fast 3D mode

Fast 3D reduces mVox scan time by up to 50%*, allowing you to more quickly collect 3D isotropic imaging that can be reformatted into any plane.

*As compared to standard FASE3D sequence

Reduce scans with Water Fat Separation

The technology based on FSE2D achieves consistent fat suppression and homogeneity while acquiring four different tissue contrasts in one scan, reducing the total number of scans you need to acquire.

Higher temporal resolution and fewer breath holds with k-t SPEEDER

k-t SPEEDER provides up to 8x acceleration, enabling you to acquire high temporal resolution cardiac cine. The high acceleration factor can also reduce breath hold times so your patients can be scanned more comfortably.

Outstanding imaging applications for every day performance

EasyTech

With the complexity of scan planning, achieving scan plane reproducibility can be a challenge. EasyTech provides automatic slice alignment for for cardiac, knee, neuro and spine taking away the variability and helping to improve and standardize the workflow with automatic positioning.

Learn more about EasyTech

⁠Enhanced scan planning with ForeSee View

ForeSee View is an essential scan planning tool designed to allow you to preview your slice planning in real time. This tool is particularly useful in anatomies that can be difficult to plan such as the pancreas, the heart, and certain orthopedic joints, reducing the need for re-scanning and saving time on scan planning for all body regions.

https://www.youtube.com/watch?v=JhIchC-jpgY https://www.youtube.com/watch?v=adJPxMWcSAU

https://www.youtube.com/watch?v=tiOhjT1tTOs https://eu.medical.canon/products/magnetic-resonance/foresee-view

Dockable Table

The Dockable Table enhances workflow and provides easy patient handling allowing medical staff to respond to any patient requirement quickly and easily.

Intelligent Monitor

The intelligent gantry interface has been completely re-designed to enhance workflow and save set-up time, displaying important patient related and coil information, and allowing you to ensure a proper and complete setup without leaving the patient’s side.

Atlas SPEEDER

Integrated workflow solution Atlas SPEEDER coils are uniquely designed to improve workflow and patient comfort. Vantage Galan 3T easily handles multiple studies by allowing you to position the patient and utilize the coils you need in one easy step.

Minimize energy use in a compact space

Every inch on Vantage Galan 3T’s design has been considered to maximize use of space while minimizing energy consumption. The system’s zero boil-off magnet fits into a small space, while providing a comfortable, open environment for your patients at the same time.

Save space

Small size, big performance. The system’s short and compact bore minimizes patient anxiety and at the same time allows a 3T scanner to be installed in a room originally designed to hold a 1.5T system. The eco-friendly cabinet design simplifies and shortens installation time.

*Without magnetic shielding. The minimum footprint may not be applied to some cases depending on each site.

The 5 Gauss line is not confined within the Scan Room. Controlled access area should be taken into account by the facility when preparing for installation. The above specifications may not meet the local requirements such as for access as is required by the Americans with Disabilities Act in the United States. Please consult with your architectural and/or electric consultant for coding requirements. Some power equipment may be required to be placed in a dedicated electrical room.

Minimize energy consumption

Vantage Galan 3T’s power-saving eco mode is automatically triggered when you lower the patient couch to help you minimize your running costs. At only 70 kVAVantage Galan 3T has the lowest rated power requirement in its class.

*For Saturn X Gradient, 90 kVA is required.